Code, craft, and contractor judgment.
ELECTRIFY works like a trade classroom for electricians, apprentices, inspectors, and contractors. Paul Abernathy moves from NEC article numbers to field behavior, safety procedure, customer trust, and the business consequences of bad judgment.
PRESS PLAY
ELECTRIFY treats electrical work as code, craft, business, and reputation all at once. The feed is heavily anchored in Paul Abernathy’s Master the NEC material, with related grounding-and-bonding discussions appearing under the same practical teaching umbrella. It is not slick. That is part of the point. The episodes often sound like an instructor staying with a problem until the listener can see where the answer comes from, not just what the answer is. A question about PVC between RMC elbows becomes a careful walk through fuel dispensing facilities, bonding requirements, hazardous-location references, and the change from 501.30 to 500.30 in the 2026 NEC. A safety episode moves through NFPA 70E, OSHA 1910, Article 120, lockout/tagout, absence-of-voltage testing, and grounding in plain jobsite terms. The grounding-and-bonding material keeps returning to Article 250, SSBJ versus EGC confusion, and questions submitted through FastTracksSystem.com. The show also spends real time on the human side of the trade. Burning bridges is treated as a career hazard. Soft skills are treated as revenue skills. Home inspectors are discussed through the lens of code knowledge, field judgment, and professional respect. Contractor success is separated from being the neatest or most technically proud electrician on the job. Business advice can be severe, especially when Paul Abernathy talks about side hustles, failed businesses, payroll, taxes, and knowing when to pivot or pause. The voice is opinionated but instructional. It assumes the audience can handle code references, blunt correction, and repeated emphasis. The show is most useful when a tradesperson wants more than a quick answer. It gives the code path, the field implication, and the professional behavior that keeps the work defensible.
Made for: Best for electricians, apprentices, inspectors, service techs, and electrical contractors who want detailed NEC reasoning tied to real field behavior. It also suits trade professionals thinking seriously about reputation, customer communication, and business survival.
What sets it apart: ELECTRIFY stands out by treating code interpretation and contractor judgment as inseparable. The same feed can move from hazardous-location bonding language to soft skills, business pivots, and why careless talk can cost future work.
The Electrical Industries FIRST weekly Podcast Series is dedicated to Electricians. Please be sure to visit https://fasttraxtube.com and subscribe for a FREE ACCOUNT to listen to all our new podcasts starting March 1, 2024. Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.
Based on 6 episodes we listened to · September 2026
Paul Abernathy connects electrical-code decisions with the customer trust, professional judgment, and business discipline that sustain work in the trade.
ELECTRIFYTM | Electrician Podcast turns the working life of electricians into practical instruction, with Paul Abernathy moving between code interpretation, safety, customer service, career judgment, and the economics of running a trade business.
Three panels beneath one meter, and suddenly your code question has a very specific answer.
Press play if you want
Short reviews from the PlayNext desk, based on the episodes we processed.
A careful code-review lesson on how one conduit detail can change the bonding answer.
Electrical code questions often live in the small gap between the installed work and the way that work is described. Paul Abernathy uses a Question of the Day to look at PVC conduit placed between RMC elbows at a motor fuel dispensing facility, then follows the bonding…
A blunt, practical episode about knowing when a pressured business should shrink, pause, or become something closer to a side hustle.
A business under pressure can look like failure from the outside, but this episode frames the move differently. Paul Abernathy draws a useful line between a real operation that can be scaled down, paused, or transitioned and paid work done around a regular job.
A blunt reminder that jobsite gossip can turn tomorrow's electrical opportunity into a closed door.
Burning a bridge in the electrical trade can turn one irritated comment into a long-term professional problem. Paul Abernathy frames reputation as something built in everyday moments with apprentices, masters, coworkers, supervisors, and even a neutral third party who hears…
A practical case for treating customer communication as part of electrical service work.
Service work is framed here as a trust problem before it is a technical one. Paul Abernathy keeps the focus on first impressions: how the technician looks, how the truck or uniform signals professionalism, and how the tone of the call can either calm a customer or deepen their…
A practical look at Article 120, where lockout, testing, and grounding make electrical safety a repeatable work condition.
Article 120 gives this single-episode review a firm trade focus: how equipment is brought to an electrically safe work condition through lockout and tagout, testing for absence of voltage, and grounding when needed.
A practical NEC-focused discussion of service conductors, grouped disconnects, and a three-disconnect setup.
Paul Abernathy keeps this episode focused on a practical National Electrical Code question: how service conductors can feed multiple service disconnects.
A clear working map of where limited-energy material is moving in the 2026 NEC.
Paul Abernathy walks through how the 2026 NEC article structure is reshaping limited-energy material, with the focus on where familiar subjects are landing. Article 750's former energy-management role moves to 130, opening 750 for grounding and bonding for limited energy.
Rob Walling on bootstrapped SaaS growth, plateaus, and exits — with founders who lived them.
Abbey Ashley's playbook for turning your job skills into a virtual assistant business.
SaaS operators on scaling, pricing and AI, metrics included.
Alex Blumberg interviews guests like Megan Phelps-Roper and Shane McAnally about failure and reinvention.
Paul Abernathy discusses the differences between good and bad electricians, focusing on professionalism, code knowledge, and work ethic.
Host Paul Abernathy provides a first look at the 2026 National Electrical Code structure, highlighting its new organization and key changes.
Paul Abernathy answers listener questions on the National Electrical Code in this episode of Let's Ask Paul.
Paul Abernappy presents the 2026 Fast Tracks course as a mix of Syngage lessons, Wednesday teaching, and question access.
Can PVC sit between RMC elbows?
A struggling business can still be a business.
Master The NEC Episode 55 centers on Paul Abernathy warning that electricians can burn bridges with inspectors, manufacturers, customers, and coworkers by posting or speaking without restraint.
Paul Abernathy discusses his thoughts on home inspectors and reflects on a live session with Inspector Preston.
Paul Abernathy uses Master of the NEC to argue that a service technician’s appearance, greeting, and tone can matter more than conduit quality or code citations.
Paul Abernathy says you are "always" responsible for testing for absence of voltage before touching equipment.
Paul Abernathy discusses why being the best electrician doesn't guarantee success as an electrical contractor, emphasizing the importance of business acumen and company success.
Paul Abernathy explains the difference between SSBJ and EGC in the context of the National Electrical Code.
Paul Abernathy helps contractors overcome the fear of charging what they're worth in their electrical business.
Paul Abernathy discusses the importance of branding for electrical contractors and other tradespeople to stand out and be top-of-mind for customers.
Paul Abernathy introduces the podcast and discusses topics related to the National Electrical Code, including panels in stairwells and EVSE loads.