Setting Course, an ABS Podcast · American Bureau of Shipping

Innovation in Ship Design: Sterntubeless Vessels with Thordon Bearings

·27 min·1 clip
The Blue Ocean Alliance redesigned the aft end into an aft inspection chamber so bearings can be replaced on board without drydocking.
Brad Cox opens by moving away from the fuel headlines that usually dominate shipping decarbonization. He points out that design choices beyond the engine are also reshaping marine operations. The episode centers on a stern-tubeless vessel arrangement. The propeller shaft bearing is lubricated by seawater. Craig Carter joins to explain the bearing side of the design, and Chris Leantopoulos joins from ABS to explain the classification side. The design is presented as a joint effort from the Blue Ocean Alliance. The alliance includes SIDARI, Thornton Bearings, Wurtsula Shaftline Solutions, the National Technical University of Athens, and ABS. The guests focus on what the arrangement changes for the vessel and the operator. A major benefit is that the bearing can be replaced on board without needing a dry-dock visit. That cuts down the need to take the vessel out of service for the work. The arrangement is described as useful across several commercial ship types. LNG vessels, container vessels, bulk carriers, and tankers are all mentioned as possible fits. The key constraint is space. The aft chamber behind the engine room must be large enough for a human inspector to enter. Very small vessels may not have enough room for that access. Mid-sized vessels stand to gain more from the arrangement. The conversation then turns to rules and approval. ABS says the concept was tested against existing shaft alignment rules and did not require a new rule set. Instead, ABS grouped the relevant requirements into a guide published last June for shipyards and designers. The episode closes on a practical frame: if the layout works, the design can deliver the operational benefits the guests describe.

As heard by us

A grounded decarbonization discussion focused on maintenance access, class rules, and shipyard practicality.

The episode moves decarbonization past fuel talk and into ship design and day-to-day operation. It treats a stern-tubeless, seawater-lubricated shaft arrangement as a practical path, with real consequences for maintenance, access, and the chance to avoid a drydock visit for…

Read the full review in PlayNext →

Why you'd press play

You want decarbonization ideas that change maintenance, access, and drydock planning.

Read the full recommendation in PlayNext →
Listen to the show on