In the Garage Automotive Podcast by Carparts.com · CarParts.com

Keeping Old School Alive: Master Modder Mano Agulian on Metal Shaping & Custom Fabrication | Ep. 19

·51 min·3 clips
SEMA now rewards one-off builds, but Mano says a few photographers and influencers can outweigh the car itself.
1. In the Garage Automotive Podcast by Carparts.com focuses on Mano Agulian and a BMW 2002 build tied to SEMA and custom fabrication. 2. Mano Agulian is the guest, Mark is the host, and Mano matters because he has built cars since 1981 and still shapes metal by hand. 3. The episode asks what it takes to turn old European imports into cars that can drive, race, and still go to SEMA. 4. Mano says the BMW 2002 shown at SEMA belonged to Chris, a dentist who wanted a raw hot rod and drives Teslas. 5. He describes the car as turbocharged, E85-capable, and capable of 600 horsepower. 6. He says the car was driven to Las Vegas at night on 91 octane fuel so it could be shown at SEMA the next day. 7. Mano says the drive used about 13 to 14 gallons and that the car made the trip on one tank. 8. He credits Sean from Church Automotive Tuning for dialing the car down for the trip. 9. Mano says he learned fabrication at age 15 after his father took him to a Pasadena shop run by Syrian Armenians. 10. He describes a 1974 Buick door skin being beaten into shape for another car, which pushed him toward metal work instead of parts swapping. 11. He says European cars like older BMWs and Italian imports are appealing because they demand ingenuity and craftsmanship. 12. Mano contrasts that with American muscle cars, which he says have so many available parts that they are easier to build. 13. He says older BMW chassis are strong enough to take gussets, bigger motors, and suspension changes if the geometry is corrected. 14. He describes a balance of power and weight, including a 2,000-pound car with 380 horsepower that he calls a lot of fun. 15. Mano says his builds start with the owner, not with the engine, because each customer wants a different kind of car. 16. He gives the example of taking two months to learn what a client like Vache wanted before starting an Alpina-style 2002. 17. The interview style is conversational, technical, and full of shop stories, with Mark asking practical follow-ups. 18. Mano sounds opinionated and protective of hand-built work, especially when he talks about trades, body shops, and SEMA politics. 19. Anyone who likes European classics, fabrication, and SEMA builds should listen. 20. Anyone looking for polished restoration talk without shop-floor opinions can skip it.

As heard by us

A shop-floor conversation about a turbocharged BMW 2002, trade skills, and why hands-on builders still matter.

Mano Agulian steers In the Garage toward a BMW 2002, European imports, and the value of hands-on trades. The car at SEMA comes across as a turbocharged build on E85, with suspension and the rest of the setup matched to its power, and the detail that it was driven to the show…

Read the full review in PlayNext →

Why you'd press play

Press play if you want a real garage talk about building, not just admiring.

Read the full recommendation in PlayNext →
Listen to the show on