3D-Druck Podcast · Johannes Lutz

NEXT GEN AM PODCAST Vom CNC-Maschinenbauer zum 3D Druck-Pionier

·56 min·5 clips
A CNC machine builder reveals why 3D printing hasn't replaced milling, but unlocked new possibilities he never imagined.
1. NextGen AM Podcast hosts Johannes Lutz and Thorsten Wolschenorf interview Dimitri of Millstep about adopting 3D printing as a complement to CNC milling machine manufacturing. 2. Dimitri is 41, founded Millstep in Ostwestfalen, NRW, and has been building CNC milling machines from design to commissioning since age 19; his brother handles CAD from an injection-mould background. 3. The episode's central thesis is that 3D printing does not replace CNC machining but adds a new layer of custom, low-volume capability that is economically and practically unavailable via traditional subtractive methods. 4. Dimitri's entry into 3D printing came from a specific problem: visible, ugly transitions between sheet metal, armoured conduit, and drag chains on his machines, which could not be solved cheaply by any standard or machined part. 5. He acquired a Bambu Lab FDM printer — nicknamed der Schwarzarbeiter (the black-market worker) because it runs 24/7, never gets sick, and never takes leave — and describes it as the best employee the law would not allow. 6. The first printed parts were simple cable-conduit covers, but Dimitri notes that handling the first functional part immediately expanded his sense of what was possible: 'je mehr du weißt oder je mehr du ausprobiert hast, umso breiter wird dein Spektrum.' 7. For years before buying his own printer, Millstep had already been outsourcing laser-sintered functional parts — such as tool-holder seats for circular-ring clamping — but the price of SLS equipment never prompted them to bring it in-house. 8. The move to in-house Bambu Lab FDM printing eventually led Dimitri to bring some of those legacy sintered parts back in-house as well. 9. The modular Werkzeugwürfel (tool cubes) emerged from workshop frustration: HSK-25 tool holders costing over 100 euros each would roll and fall in the workshop, but no commercial storage system for small-form-factor holders existed. 10. The cubes interlock on two sides, clip out on the other two, and stack into any configuration, allowing a battery of tool holders to be stored securely; customers began ordering sets after seeing them on Millstep machines. 11. Dimitri describes his new-part process: notice a problem, consult the workshop team, take informal votes on whether it is worth solving, move to sketch, iterate through two or three failed prints, and arrive at a final part — with the first two attempts typically discarded. 12. He has ordered two additional Bambu Lab printers because the first runs 24/7 and the delivery of the second has already been delayed three to four weeks, so he ordered a third. 13. A detailed fabrication example: when aligning M12 bolts coaxially in drilled aluminium plates for a large welded assembly, Dimitri printed 16 rings (13mm OD, 12.2mm ID) in minutes to set the exact annular gap, allowing the bolts to be welded in position regardless of hole placement accuracy — eliminating tolerance-chain complexity entirely. 14. Host Johannes Lutz articulates the design principle: by using the printed ring as a positioning device, the hole could be two millimetres off-centre without consequence, collapsing what would have been a multi-stage tolerance analysis into a trivial operation. 15. Dimitri argues that metal 3D printing is technically possible for some Millstep components but economically irrational: an axis that can be milled from an aluminium plate cannot be sold to a customer at the price a metal print would cost. 16. The broader barrier to 3D printing adoption in industry, Dimitri argues, is not willingness but CAD capability: people who cannot design in CAD cannot print useful parts, and construction is a skill that must be developed over years. 17. He distinguishes between craftspeople (who typically lack design workflow) and industrial firms with product development functions, noting that the latter are better positioned to adopt the technology meaningfully. 18. The episode is a German-language engineering conversation; the hosts are knowledgeable interviewers who push for concrete examples and occasionally contribute their own fabrication observations. 19. Tone is informal, workshop-floor practical, and occasionally humorous; Dimitri is candid about what frustrates him and what excites him. 20. Listeners in CNC machining, mechanical engineering, or small-batch manufacturing who want an operator-level view of FDM integration will find the episode directly applicable; listeners seeking marketing or business strategy content will find it too technically narrow.
Listen to the show on